Our logistics system is not just a robust and reliable drone platform, but also includes all those interfaces and software connections you need to realise your transport project.
Departure of the pre-programmed waypoint route with permanent intervention option
The logistics system consists of drone, ground control station, ready-to-use IT interfaces and process flows
Wind-resistant for wind speeds up to 10 m / sec.
Ultra-compact, foldable carbon design
100% data security through stand-alone concept
Equipped with our genuine triple redundant flight control - Made in Germany
Determination of an approvable flight route from the take-off point to the destination landing point. Programming of waypoints incl. safety landing zones.
We support you in applying for a permit to realise the project in the "Specific" category in accordance with the EU Drone Regulation.
As a service provider, we not only supply the logistics system, but also train your ground and flight personnel. Our training procedures are officially recognised.
For high service availability, we offer the appropriate maintenance packages with exchange drones so as not to interrupt your logistics service.
Your remote pilot, trained by us, controls the logistics drone from a distance via our ground control software, while your ordering system permanently informs the customer about the remaining time until arrival.
The G5plus Flight Controller has three redundant flight control cores. These control units continuously calculate the position and position data of the aircraft. By comparing the derived data and a powerful decision logic, faulty results are immediately detected and the corresponding core is deactivated. A fourth auxiliary core handles communication with the world outside and ensures a high-performance data link without impairing flight stabilization.
Each flight control core has its own set of attitude, magnetic and altitude sensors. This redundancy protects not only in case of total failure of one sensor. Deviations in the sensor data, e.g. due to incorrect measurements, are also corrected and taken into account during flight stabilization.
Standardized interfaces facilitate the evaluation of flight data. Via a USB connection the G5plus Flight Controller can be configured and flight data can be retrieved without additional hardware. Furthermore, a multitude of additional interfaces for the connection of peripheral devices are available. Some of these interfaces are redundant, so that e.g. three GNSS receivers can be operated simultaneously.
The G5plus Flight Controller communicates via an AES encrypted WLAN connection. Mission data can thus be transferred easily and safely directly to the aircraft during operation.
A powerful Flight Recorder captures all data occurring during the flight, such as current attitude and position, sent control commands, status of the current mission, etc. at a high rate. This allows, for example, the trajectory of a mission to be easily traced and linked to external events such as the acquisition of single images.
|Attitude control 512 times per second||Yes|
|Automatic treble control 24-bit barometric||Yes|
|Radar distance meter||Yes|
|Autonomous flight max. waypoints||up to 4000|
|Transport container||Yes / Carbon with Central shutter / Cooler box 23x16x12 cm|
|Digital option port (for future applications)||Yes|
|Dimensions||Ø 85 cm, H 49 cm|
|Flightcontrol Multirotor G5plus redundancy||Yes/Triple|
|Flight data log||128 Hz|
|GPS flight assistant (Position hold, Coming home)||Yes|
|L1/L2 GPS, GLONASS, Beidou, Galileo||Yes/Triple|
|Max. airspeed||50 km/h|
|Max. Flight time (ideal)||22 Min.|
|Max. Range (ideal)||15 km|
|Max. Take-off weight (ideal)||7500 g|
|Wind stable till||10 m/s|
|LTE via all providers with MultiSIM||Yes / Double redundant with 2 Sim cards|
|ADSB Signal in||Yes|
|Mode S Signal in||Yes|
|Transmission of the position to DFS||Yes|
|RTK Correction service link||Yes|
|Real-time mission monitoring||Yes|
|Latency||< 0.5 s|
|Processors||3 independent control cores, 1 auxiliary core 216MHz ARM cortex M7|
|GPS||Ublox NMEA compatible interfaces for 3 external gps receivers (redundant) or 1 external receiver (non redundant)|
|Blackbox||SD HC memory card|
|Motor controller||MULTIROTOR proprietary (redundant) or pulse width modulated (non redundant)|
|Interfaces||CAN, UART, SPI, I2C, USB, WLAN|
|User extensions||Current attitude and position data is forwarded via CAN bus to customized sensor equipment.
Time stamps of external events are stored on the blackbox.