The G5S Flight Controller offers maximum performance for drones, UAVs and FPV systems in a minimum of space. With the STM32H743 microcontroller, dual IMUs and broad software compatibility, it is the perfect choice for demanding DIY projects, research drones or commercial multicopters.
Small
Compact design
Reliable
Through Dual IMUs
Versatile
Connective and compatible
G5S Flight controller
160€ plus VAT
Prices flexible – customised offers on request.
Compatible with Betaflight, ArduPilot & INAV
- Full support for Betaflight, ArduPilot and INAV
- Seamless integration with common tools such as Mission Planner, QGroundControl, Betaflight Configurator and INAV Configurator
- Ideal for racers, long-range wings and autonomous multicopters
Precision & redundancy for maximum flight stability
- DPS368 Barometer for high-precision altitude measurement
- Dual ICM-42688 IMUs for improved redundancy and position stability
Versatile I/O - ready for complex systems
- 13× Servo outputs, 8× UART, 6× ADC, 2× I²C, 1× CAN, 1× SPI
- ESC connector with VBat, current, servo & telemetry
- DSHOT support on 8 channels
- Dual analog camera inputs with configurable OSD overlay
- Selectable power supply for external components: 5 V or VBAT
- Onboard microSD slot for black box logging - ideal for debugging and performance tuning
Compact & compatible - ideal for every frame
- Compact 36 × 36 mm design, standard 30.5 mm mounting pattern
- Top-side solder pads for clean, space-saving cabling
- USB-C port for configuration, firmware updates and data access
Features and specifications
| Processors | Renowned STMicroelectronics STM32H743 microcontroller |
| Dimensions | Compact 36×36 mm form factor with standard 30.5 mm mounting pattern |
| Compatibility | Betaflight, INAV and ArduPilot firmware. Fully supported within their application ecosystems – including Mission Planner, QGroundControl, INAV Configurator and Betaflight Configurator |
| Sensors | Dual ICM-42688 IMUs for enhanced redundancy and stability |
| DPS368 high-precision barometric pressure sensor | |
| Blackbox | Onboard microSD card slot |
| FPV | Dual analog camera inputs with configurable OSD overlay |
| Power supply | Selectable 5 V or battery voltage power rail for external components |
| Motor controller | DSHOT protocol support on 8 servo channels or PWM |
| Connectivity | 8× UART, 2× I²C, 1× SPI with dual independent chip selects |
| 1× CAN bus with dedicated connector | |
| 13× Servo outputs | |
| PPM RC input | |
| 6× ADC inputs (Vbat, Current, Vbat2, Current2, RSSI, AirSpeed) | |
| USB-C port | |
| ESC connector (Vbat, Current, UART-RX, Servo1, … , Servo4) | |
| All signals and power rails accessible via top-side solder pads |